Crystal Purple Wire Mesh Tubing Bracelet: Project Instructions
|2 crimp leather ends||Crimping Pliers|
|1 parrot clasp||Wire Cutters|
|5cm medium twisted loop chain||glue|
|1 jump ring|
|18cm wire mesh tubing|
|30 x clear AB 4mm bicone glass crystals|
|30 x purple 4mm bicone glass crystals|
|30 x pink 4mm bicone glass crystals|
|30 x light blue 4mm bicone glass crystals|
|30 x rose purple 4mm bicone glass crystals|
Take the wire mesh tubing and place the end in a leather crimp. Add a tiny dab of glue and squish both sides of the leather crimp down, to hold the wire mesh tubing in place. From the other end, fill the hollow mesh tubing with a mix of 4mm glass bicone crystal beads (we used clear AB, purple, pink, light blue and rose purple, with purpe tubing). Once the tubing is full to the length you want, cut off any excess tubing, close the tubing by placing the end in a leather crimp, adding a dab of glue and squishing down both sides.
On one side of your bracelet, add a jump ring and a parrot clasp to the leather crimp. On the other side, add the length of chain.
© 2016 www.eurekabeads.com.au These free beading instructions may be used for personal use only