Free Beading Instructions: Pink Two Strand Chain Bracelet - Eureka! Beads Australia

Pink Two Strand Chain Bracelet
[EX45211]

Click to enlarge

Materials:	Tools:
eye pins [12]	Crimping Pliers
strong jump rings [16]	Wire Cutters
1 magnetic clasp with loops	Twirly Wirlies
wide daisy spacers [24]
2 strand glass beads [6]
note: quantities in [square brackets] indicate how many of that particular material we used. Depending on what size bracelet you're making, you might need more or less.

Take an eye pin and thread on a wide daisy spacer. Thread the eye pin through one of the holes in the two strand glass bead. Thread on another wide daisy spacer. Leaving a space of 10mm, cut the excess off the eye pin. Twirl the end using your twirly wirlies. Pick up another eye pin and thread on a wide daisy spacer. Thread the eye pin through the second hole in the two strand glass bead. Thread on another wide daisy spacer. Leaving a space of 10mm, cut the excess off the eye pin. Twirl the end using your twirly wirlies. Put aside.

Repeat this process another 5 times to make a total of 6 beads with 2 eye pins threaded through each bead. Pick up one of the sets and open up one of the eye pins. Thread on a jump ring and close. Open up and thread a jump ring onto the other loop on the eye pin. Do the same with the second eye pin attached to the bead.

Pick up another bead set and open up one of the eye pin loops. Join it to the corresponding jump ring from the first set (i.e. join the top two eye pins with a jump ring and the bottom two eye pins with a jump ring). Repeat this process until you have joined all 6 sets.

On one end of your bracelet, join the two remaining jump rings with a third jump ring (as they are quite strong, you will need to use 2 sets of pliers, your crimping pliers and twirly wirlies will be fine). Whilst you have the third jump ring open, attach one end of the magnetic clasp. Repeat on the other side of the bracelet to finish.

© 2010 www.eurekabeads.com.au. These free beading instructions may be used for personal use only.
Click on the buttons below to share these instructions with your friends

This FREE beading project uses the followng products: