Free Beading Instructions: Yellow and Orange Swarovski Charm Bracelet - Eureka! Beads Australia

Yellow and Orange Swarovski Charm Bracelet
[EX65201]

Yellow and Orange Swarovski Charm Bracelet

Click to enlarge

Materials:	Tools:
9 eye pins	2 pairs of Crimping Pliers
50 plain metal balls	Twirly Wirlie Pliers
17 x 4mm bicone swarovski beads	Wire Cutters
16 head pins
4 x 2 colours of 6mm bicone swarovski beads (total of 8)
13 strong jump rings
1 parrot clasp
note: these quantities make an 18cm (small) bracelet. To make a larger bracelet, simply add more beads. Our bracelet was made with silver coloured findings, fireopal and jonquil swarovski crystal beads.

Take an eye pin and thread up with:
- a plain metal ball
- a 4mm bicone swarovski bead
- a plain metal ball

Leaving a space of 10mm, cut the excess off the eye pin. Twirl the end using your twirly wirlies. Repeat with 8 of the 4mm bicone swarovski beads (so that you have 9 altogether). Put aside.

Pick up on of the headpins and thread up with:
- a plain metal ball
- a 4mm bicone swarovski bead
- a plain metal ball

Leaving a space of 10mm, cut the excess off the eye pin. Twirl the end using your twirly wirlies. Repeat with 7 of the glass seed beads (so that you have 8 altogether). Put aside.

Pick up on of the headpins and thread up with:
- a plain metal ball
- a 6mm bicone swarovski bead
- a plain metal ball

Leaving a space of 10mm, cut the excess off the eye pin. Twirl the end using your twirly wirlies. Repeat with the rest of the 6mm bicone swarovski beads (so that you have 8 altogether). Put aside.

Open up one of the jump rings and thread onto it:
- one of the eye pins
- one of the 4mm bicone head pins
- one of the 6mm bicone head pins
- another 4mm bicone eye pin

Close the ring securely. Open up another jump ring and thread it through the other end of one of the seed bead eye pins from your first set. Then thread on:
- a 4mm bicone head pins
- one of the 6mm bicone head pins (opposite colour from the first one)
- another 4mm bicone eye pin

Close securely. Repeat this process until you have used up all your pieces. On both ends you should finish with a 4mm bicone swaroski eye pin.

Open up one of the jump rings (as they are quite strong, you will need to use 2 sets of pliers) and thread on the parrot clasp. Thread through one of the eye pin loops on the end of your chain bracelet. Close the jump ring securely. To create a small adjustable chain on the other end, open up another jump ring and thread onto the other end of your chain bracelet and close securely. Repeat until you have about 3 or 4 jurmp rings on the end of your bracelet. Your bracelet is now ready to wear!

© 2010 www.eurekabeads.com.au. These free beading instructions may be used for personal use only.
Click on the buttons below to share these instructions with your friends

This FREE beading project uses the followng products: